Description

Introduction of ISO5210 Flange Multi-turn Electric Actuator BD15-C6

SO5210 Flange Multi-turn Electric ActuaItor BD15-C6 follows global standard mechanical interface rules. The product meets ISO5210:2001 and GB/T12222-2005 flange specs. Standardized flange brings strong compatibility to the drive unit. BD15-C6 matches most multi-turn valves without modification. Gate, globe and regulating valves connect to the actuator directly. Fast installation shortens project period and eases on-site work. Stable torque ensures consistent valve movement in each operation. Multiple speeds meet different stroke time demands. Wide voltage fits global industrial power supply. Wide temperature ensures stable running in various plants. Standard interface cuts later replacement and upgrade cost. BD15-C6 is a universal solution for process automation.

BD15-C6 has a reliable structure for long-term industrial use. Cast aluminum alloy housing offers high strength and light weight. Double sealing protects inner parts from dust and moisture. O-rings seal static joints and oil seals protect rotating parts. The whole unit reaches IP67 protection for harsh environments. Internal gears use high-performance lubricating grease. Lifetime lubrication avoids regular oil adding. Mechanical wear decreases in continuous running. Stable transmission stays consistent in years of use. Durable structure reduces failures and maintenance. Rugged design fits outdoor, underground and humid sites. ISO5210 Flange Multi-turn Electric Actuator BD15-C6 integrates full control and protection functions. Automatic phase sequence adjustment simplifies on-site wiring. Torque overload protection secures valve and actuator. Motor overcurrent protection avoids burnout risks. Phase loss protection stops dangerous running in time. Motor thermal protection cuts power at high temperature. The actuator supports local and remote control. Analog input realizes precise positioning.

Primary Technical Parameters of ISO5210 Flange Multi-turn Electric Actuator BD-C6

• Ambient Temperature Range: -20℃～+60℃
• Option: -30℃～+70℃
• Supply Voltage: Three-phase: 380Vac±10% 50Hz±2%;
• Single-phase: 220Vac±10% 50Hz±2%
• Notes: a. Optional three-phase 400 Vac, 415 Vac, 440 Vac and single-phase 110 Vac, 115 Vac, 208 Vac, 230 Vac motors. Both 50Hz and 60Hz frequencies can be supplied. Please state requirements upon ordering;
• b. Standard motor is three-phase three-wire. Specify if three-phase four-wire system is required;
• c. If voltage/frequency deviations exceed above ranges, or operation with substantial voltage drop is desired, please indicate when ordering.
• Input Signals: DC4～20mA; Dry contact; DC24V, AC220V pulse and level signals
• Notes: DC0～20mA; DC0～10mA; DC1～5V; DC0～5V; DC0～10V; Profibus-DP; Modbus; Hart; Devicenet; FF bus or other control signals. Specify during ordering if needed.
• Output Signals: DC4～20mA; 4 field-configurable monostable output contacts, 1 remote indication monostable output contact, 1 fault alarm monostable output contact
• Notes: For additional analog feedback signals, extended contact feedback, or 4 field-configurable bistable output contacts, please specify during order placement.
• Contact Switching Capacity: 250Vac/5A or 30Vdc/5A
• Output Load Impedance: ≤750Ω

Dot-matrix LCD Display

ISO5210 Flange Multi-turn Electric Actuator BD15-C6 equips a high-resolution dot-matrix liquid crystal display module. The display shows valve opening percentage with 1% precision clearly. Large digital fonts bring good visual effect for on-site operators. Chinese and English menu systems meet different user habits. Real-time torque value appears on the screen during operation. Limit setting status can be checked directly through the interface. Alarm messages show in text form for fast fault recognition.

High-brightness LED lights assist basic state indication. Green LED lights up when valve reaches full open position. Red LED keeps lighting when valve stays at full close point. LEDs flash during movement to show running direction intuitively. Display system works steadily under various industrial lighting conditions. Besides, anti-interference design avoids flashing or blurring in electromagnetic environment. The screen keeps clear content even after long time continuous working. As a result, operators can learn full running state without opening electrical cover.

Non-Intrusive Design

ISO5210 Flange Multi-turn Electric Actuator BD15-C6 adopts advanced non-intrusive operation structure for safe configuration. Meanwhile, magnetic control knob sends signals without physical shaft penetration. In turn, Hall sensors inside the housing receive commands reliably. The sealed structure blocks external dust and moisture completely. Thus, operators finish parameter setting without opening electrical cover. Additionally, infrared setter provides another non-intrusive adjustment method. All calibration work can be done in fully sealed state. Specifically, non-intrusive design brings obvious advantages in harsh environments. For instance, outdoor installation keeps internal parts dry in rainy and snowy weather. Besides, humid environment cannot cause short circuit or corrosion risks. Similarly, dusty plant area cannot lead to internal component blockage. Furthermore, corrosive gas cannot damage circuit board and sensors. Therefore, maintenance work becomes safer and more efficient for field workers. Eventually, sealed control structure extends service life of electronic parts. 

Absolute Encoding Position Sensor

BD15-C6 uses BM16 multi-turn absolute encoding position sensor. This sensor applies patented non-contact measurement technology. With this design, mechanical wear does not happen during position detection process. In addition, absolute position data remains correct after complete power loss. Therefore, backup battery is not necessary for position memory function. Furthermore, the sensor provides high-precision position signal for control system. As a result, position detection error stays in an extremely low range. For this reason, stable output ensures accurate valve positioning each time. Besides, vibration and temperature change cannot affect detection precision. Meanwhile, anti-interference ability meets strict industrial application demands.

Overall, absolute sensor eliminates position drift risks effectively. At the same time, power recovery does not need reset or calibration operation. As a result, continuous production process will not be interrupted by power failure. In turn, reliable position data supports high-precision automatic control. Ultimately, ISO5210 Flange Multi-turn Electric Actuator BD15-C6 ensures stable and accurate valve movement with this core component.

Related Product : BD/BDM-C8 Multi-turn Intelligent Electric Actuator

BD/BDM-C8 series acts as a core related product for multi-turn valve control. Meanwhile, it fully follows ISO5210:2017 standard flange for strong compatibility. Furthermore, it upgrades protection level to IP68 and supports explosion-proof structures. Moreover, it adds Bluetooth communication and power-off LCD display for smarter use. Besides, it provides split-type design to resist high temperature and strong vibration. In addition, it equips BM18 absolute encoder for stable position detection. Also, it supports multiple bus protocols for flexible system connection. This series expands torque range greatly with matched gearboxes. Meanwhile, it uses lifelong lubrication inside to reduce maintenance work. Furthermore, it offers complete protection functions to ensure safe running. Moreover, it fits power, petroleum, chemical and hazardous locations well. In addition, it keeps non-intrusive setting for easy operation. Overall, it becomes a top choice for harsh and demanding working conditions.